Last updated:
An electrochemical oxygen analyzer measures oxygen with a cell that is consumed as it reacts. An optical analyzer measures it without that cell. In natural gas service the practical differences are what has to be replaced, how H₂S and CO₂ affect the sensor, and how often someone has to visit the site.
An electrochemical or galvanic cell generates a current as oxygen reacts at an electrode. The cell is consumed as it works, so its life is finite: it depends on how much oxygen the cell sees and on the gas around it, and the cell has to be replaced on a schedule.
An optical oxygen analyzer reads oxygen with a fully optical sensor instead of an electrochemical reaction. For an OxyScout™ trace oxygen analyzer, that means there is no electrochemical cell to replace. The outputs are 4–20 mA and RS-485 Modbus RTU.
| Factor | Electrochemical (galvanic) cell | Optical (OxyScout) |
|---|---|---|
| What wears out | The electrolyte and electrode are used up, and the cell is replaced on a schedule. | No electrochemical cell has to be replaced. |
| H₂S and CO₂ | H₂S can poison cells, and CO₂ can react with some electrolytes. | OxyScout has no cross-sensitivity or poisoning from H₂S, CO₂ or the other gases that plague galvanic cells. |
| Site visits | A cell change needs a visit to the site. | There is no scheduled cell swap. |
Because the optical sensor doesn't require consumable cell replacement, the total cost of ownership can be lower than that of electrochemical O₂ analyzers.
Read the optical oxygen analyzer specifications, or see where oxygen enters in the applications.
The OxyScout oxygen analyzer is priced similar to electrochemical O₂ analyzers. The difference is what it costs to own: OxyScout has no electrochemical cells to replace, so there are no replacement cells to buy and no site visits to change them. Over time, OxyScout costs less to own than an electrochemical analyzer. For a quote on your application, book a quote meeting with Standard Sensors.
No. An optical analyzer has no electrochemical cell to replace.
H₂S can poison electrochemical cells. OxyScout has no cross-sensitivity or poisoning of the optical sensor from H₂S, CO₂ or the other gases that plague galvanic cells.
You might stay with one at an easy-to-reach site with a single analyzer on clean gas.
Book a 30-minute meeting to review your application and we'll send you a quote after the call.
Get a Quote